P-Audio PH-94 1.4" Throat High Frequency Horn
Click here to download the Datasheet (PDF)
The P Audio PH-94 is a wide bandwidth high frequency horn. The PH-94 is a constant directivity design that features a square mouth that allows a “rotatable” directivity configuration. The PH-94 may be rotated between a 90 degree horizontal and 40 degree vertical pattern to a 40 degree horizontal by 90 degree vertical coverage pattern. The flat front design allows the PH-94 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The included angles of 90 degrees and 40 degrees make the PH-94 a very high performance short throw high frequency wave guide. This makes the PH-94 ideal for wide coverage requirements as well as for down fill applications.
The PH-94 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the PH-94 compatible with many other compression drivers as well. This throat geometry also provides for controlled beamwidths at higher frequencies. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the PH-94 ideal for wide range and low frequency crossover points.
The PH-94 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (315 mm) by 12 inches make the PH-94 an ideal mate for both 12 inches low frequency woofers as well as 15 inch woofers. The PH-94 is an ideal choice for professional level two way system designs.
The PH-94 may be used with the following P.audio professional compression drivers: BM-D740, PreNeo-740N (or any industry standard compatible driver.)
|Nominal Coverage Angle ( H° X V°): - 6 dB. 90° x 40°
Cut Off Frequency ( Hz.): 400 Hz
Throat Diameter: 35.5mm (1.4")
Mounting Type: BOLT ON
Construction: Injected Polymer A.B.S.with glass fiber filled Black Polycabonate
MOUNTING DIMENSIONS :
Rear Height : 282mm (11.10")
Rear Width : 278mm ( 10.94")
OVERALL DIMENSIONS :
Mount Height : 315mm (12.40")
Mount Width : 315mm (12.40")
Length : 120mm (4.72")
BAFFLE CUTOUT DIMENSIONS :
Height : 284mm (11.18")
Width : 280mm (11.02")
Net Weight : 1.30kg (2.86 lbs)
Shipping Weight : 1.70kg (3.74 lbs)
Packing Dimension : 335 mm x 335 mm x 150 mm / 13.2" x 13.2" x 5.9"